Janome Slider Guide Foot - 202293004 (9mm)
Fits these Janome machines: CM7, S6, S7, S9, MC8200QC, MC9450QCP, MC15000
Janome Darning Foot - 5mm
Part No. 200127000
The Darning Foot is used to both mend over holes and tears, and to perform decorative stitching by way of Free Motion. Attach the darning foot to the presser bar with the lever positioned over the needle clamp screw. Drop your machine’s feed dogs, or if not an available function, use a darning plate to disable them. Place fabric, ideally secured into an embroidery hoop. Lower the foot and sew at a low speed, moving the fabric back and forth, and alternate to 90 degrees to secure over tears, or manoeuvre over a drawn design.
It's suitable for use with these Janome sewing machines: DC1030, JR1012, RE1306, 721, 709, 725S
JANOME HD Roller Foot Cat C High Shank 7mm, Cat D 9mm Machines - 202418007
For Category C & D, 1600p & HD9 (Not MC7700QCP)
The Janome HD roller foot is for sewing curves, topstitching and piping with a large pipe. This foot gives you a better view and allows you to manipulate the fabric easily and accurately.
This innovative new foot can smoothly control materials such as leather and vinyl which are prone to catch in the feed dogs. When using this foot, the base of the needle is clearly visible, making your work easier.
Smooth Feeding of Fabric - Because the roller holds the material while rotating, materials such as leather and vinyl are fed smoothly. Also makes sewing curves a breeze.
Great for Piping - Thick piping cord can also be sewn with the needle directly beside the cord. If a Zig-Zag or Satin Stitch foot were used, the side of foot would be against the cord instead. Can be used with piping cord which is 17mm or less in diameter.
Adjust roller position relative to needle position - For best sewing results, position the roller and needle close to each other. Combined with the roller holding down the fabric, this has the effect of keeping the stitch length as uniform as possible.
With sharp curves, setting a short stitch length is also effective. Test sewing and adjusting thread tension and stitch length is recommended.
Roller part is retractable - The roller can be retracted to the left side to make a space around the needle and allow for easier threading. The roller part can be moved while pushing the screw at the top of the foot.
Handling of delicate materials - When working with delicate materials such as leather, enamel and vinyl, you can place a thin layer of paper between the roller and the feed dogs in order to prevent it leaving marks on the material. If the pressure is too strong, scratches or damage to the roller may also occur, so adjusting foot pressure to recommended values is advised. For recommended foot pressure for each sewing machine, please refer to the included Roller foot instructions.
Compatible with High Speed Machines, and High Shank 9mm and 7mm stitch width models.
Janome HD9 Professional
Janome 1600P-QC
Janome Horizon Memory Craft 9450QCP
Janome Atelier 9
Janome Atelier 7
Janome Horizon Memory Craft 15000
Janome Horizon Memory Craft 15000 V2
Janome Memory Craft 6650
Janome Memory Craft 6700P
Janome Memory Craft 9850
Janome M7 Continental
Janome Free Motion Couching Foot - 9mm - 202110006
Add a decorative touch to your quilting and home decor projects with this foot. It works like other free motion feet with the addition of small grooves that allow cording, yarn, or threads to pass underneath the presser foot. Two different feet are included to match your material's thickness.
Janome Ruffler Foot - 9mm Models - 202095004
Do you want amazing perfect rufflers? Then THIS IS THE FOOT FOR YOU!
Rufflers have been around for a very long time and have changed very little over the years; they have however remained very popular. Although at first sight a ruffler may appear bulky and complicated, its innovative design actually makes it very easy to use. This design allows fabric to be ruffled or pleated to the desired fullness quickly and easily and also has the capability to vary the sizes of ruffles.
Fits: Skyline S5, Skyline S6, Skyline S7, Skyline S9, MC8200, MC8900, MC9400, MC6650, MC6700P, CM7, CM8, MC9480, MC9450 , MC9850, MC 9900, MC12000, MC14000 and MC15000.
Janome Artistic Digitizer Full Software
Introducing the *NEW* digitizing software from Janome, with all new interface and tutorials.
ONE Software for MS Windows® and Mac OS®. Artistic digitizer embroidery software is equipped with a next generation working environment which will excite with its innovative design, 3D integration, intuitive usability and stunning embroidery quality.
Every embroidery creation takes less time and effort to be made, providing you more time to enjoy your creations.
Artistic digitizer is even more. It includes tools for creating cutting, painting and quilting designs. In addition, you can create stencil and designs with crystals/rhinestones. One software for all crafting creations. All this in dual platforms, MS Windows® and Mac OS®. No more operating system dilemma. Be the designer, the gift giver or the award winner; with Janome Artistic Digitizer to you have the power to be.
Create and embellish any project easily with this robust embroidery, sewing and crafting software. Achieve professional quality results quickly and easily, without needing to be an expert. Everything you need is in this powerful and comprehensive package. You can create original designs, add personal touches, choose from a plentiful selection of digitizing options, advanced editing features, crystal work, quilting motifs and more.
With this software you have the freedom to take your creative expression in any direction you can imagine. Artistic Digitizer gives you the freedom to be anything.
Check out the link below to compare this software to the Junior version
Janome Optic Magnifiers Set
When you need to get a closer view, attach the magnifier to make it easy to see the tiniest detail under the needle. Useful when threading, adjusting the position of the fabric, and carrying out detailed work. Attaches to machine face plate magnifying the needle area for perfect stitch placement.
Fits these Janome machines: Continental M7
Janome FMQ Bobbin Holder Low Tension
Fits these Janome machines: Continental M7 Professional
Janome Machine Pin Cushion - Purple with White Dots
When you are sewing or quilting, you always need your pins nearby. But within minutes of setting your classic tomato pincushion on your sewing table, you can bet it'll be covered by fabric, knocked on the floor or just out of reach.
Janome has come up with a creative solution for this: a pincushion that mounts on the top of your machine. You can always find it, reach it and you'll never knock it on the floor.
This pincushion fits Janome models that accept an additional Spool Pin Holder, these are the following models it works with:
Horizon Memory Craft 12000, Memory Craft 9900, Skyline S3, Memory Craft 11000 Special Edition, MC 350E, MC 200E, Memory Craft 500E, Horizon Memory Craft 8900QCP Special Edition, Horizon Memory Craft 8200QCP Special Edition, Skyline S7, JNH7700, Memory Craft 6600P, Memory Craft 6500P, 6300P, HD-3000, DC1050, Hello Kitty 18750, Magnolia 7330, Magnolia 7360, DC2013, DC5100, JNH2030DC, 3160QDC, 4120QDC, 8077, 49018, 49360, DC2012, DC2014, DC3050, DC4030P, JW7630, 8050, NQM 2016, Hello Kitty 11706, HD-1000, 2222, 2212, 2206, 3128, Hello Kitty 13512, Hello Kitty 14412, Hello Kitty 15312, 41012, 128, JW5622, JW7522, Skyline S5, JW8100, Horizon Memory Craft 9400QCP, Horizon Quilt Maker Memory Craft 15000, Skyline S9, AMH M100, MOD-200, M7200, M7050, 6100, 6050, M7100, SUV1122, Horizon Quilt Maker Memory Craft 15000, Memory Craft 6700P, Arctic Crystal, 4120QDC, 3160QDC, 2030QDC, HD-3000 Black Edition, 4300QDC, Horizon Memory Craft 9450QCP, DC2019, Skyline S6, Sewist 780DC, Sewist 740DC, Sewist 721, Sewist 725S, NPCF50, Memory Craft 6650, Memory Craft 550E, Continental M7 Professional, Memory Craft 9850
If your Janome machine is not included in the above list please contact us and we will let you know if this pin cushion will work with your machine.
Janome 9mm Lapped Seam Foot
This foot can provide perfect-looking and durable seams on medium-heavy weight to heavyweight fabrics. You can create beautiful lap seams without ironing.
Available for 9mm Maximum Stitch Width Machines
Part Number: 202463007
Janome Coverstitch Extra Wide Table - 795812008
This extension table with the Coverpro machines. More space gives you a much larger work surface and extra support for your sewing projects.
Measures 11.5" x 8"
Fits: Coverpro 900CPX, 1000CPX, 2000CPX, 3000CPX
Janome HP2 Foot - 202415004
This foot provides superior visibility and is great for curves and precise topstitching. It holds fabrics firmly in sync with the feed dogs to achieve professional results.
For use in combination with the professional grade needle plate (HP)
Matching the edge of the fabric against the edge of the foot will give you a perfect 1/4" seam allowance.
