This 4-1/2 x 12-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features. This 4-1/2 inch width is also available in 8-1/2 inch (Item CGR48) and 18-1/2 inch (Item CGR418) lengths.
Total Size - 4-1/2in x 12-1/2in
Creative Grids® products are made in the USA
This 6-1/2 x 24-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature — designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides — to add the 1/2 inch seam allowance.
Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features. This 6-1/2 inch width is also available in 12-1/2 inch (Item CGR612) and 18-1/2 inch (Item CGR618) lengths.
Total Size - 6-1/2in x 24-1/2in
Creative Grids® products are made in the USA
Whether you’re new to crafting or a pro, you’ll appreciate this Aqua OLFA® rotary mat. It not only protects your cutting surfaces, it protects the edges of rotary blades. The mat’s grid lines are designed for easy measuring and accurate cutting of straight lines and precise angles.
Features
- 1.5mm thick
- Double-sided 12×18 mat is aqua for general crafting and has yellow grid lines on other side for detailed cutting
- Self-healing finish reseals surface cuts, providing a continually smooth surface for all cutting projects
- Store flat and out of direct sunlight
- For use only with rotary blades; fixed-blade knives blade may damage mat
Brother ScanNcut DX Thin Fabric Automatic Blade Holder - CADXHLDQ1
The Brother CADXHLDQ1 Thin Fabric Auto Blade Holder holds the Brother ScanNCut DX Thin Fabric Auto Blade so you can cut fabric used for quilting and appliqué purposes that do not have a fusible backing. This holder does not accommodate the Auto Blade or other Brother Cutting machine blades.
For use with the Brother ScanNCut DX machines:
- SDX1000
- SDX1200
Janome Machine Pin Cushion - White with Red Dots
When you are sewing or quilting, you always need your pins nearby. But within minutes of setting your classic tomato pincushion on your sewing table, you can bet it'll be covered by fabric, knocked on the floor or just out of reach.
Janome has come up with a creative solution for this: a pincushion that mounts on the top of your machine. You can always find it, reach it and you'll never knock it on the floor.
This pincushion fits Janome models that accept an additional Spool Pin Holder, these are the following models it works with:
Horizon Memory Craft 12000, Memory Craft 9900, Skyline S3, Memory Craft 11000 Special Edition, MC 350E, MC 200E, Memory Craft 500E, Horizon Memory Craft 8900QCP Special Edition, Horizon Memory Craft 8200QCP Special Edition, Skyline S7, JNH7700, HD-3000, DC1050, Hello Kitty 18750, Magnolia 7330, Magnolia 7360, DC2013, DC5100, JNH2030DC, 3160QDC, 4120QDC, 8077, 49018, 49360, DC2012, DC2014, DC3050, DC4030P, JW7630, 8050, NQM 2016, Hello Kitty 11706, HD-1000, 2222, 2212, 2206, 3128, Hello Kitty 13512, Hello Kitty 14412, Hello Kitty 15312, 41012, 128, JW5622, JW7522, Skyline S5, JW8100, Horizon Memory Craft 9400QCP, Horizon Quilt Maker Memory Craft 15000, Skyline S9, AMH M100, MOD-200, M7200, M7050, 6100, 6050, M7100, SUV1122, Horizon Quilt Maker Memory Craft 15000, Memory Craft 6700P, Arctic Crystal, 4120QDC, 3160QDC, 2030QDC, HD-3000 Black Edition, 4300QDC, Horizon Memory Craft 9450QCP, DC2019, Skyline S6, Sewist 780DC, Sewist 740DC, Sewist 721, Sewist 725S, NPCF50, Memory Craft 6650, Memory Craft 550E, Continental M7 Professional, Memory Craft 9850
If your Janome machine is not included in the above list please contact us and we will let you know if this pin cushion will work with your machine.
Pre-Cut Hexagon Templates which are ideal for English paper piecing in quilting and patchwork.
Hexagons 0.75" White x 100pc
The Silicone Appli-Fuse Mat is made of a silicone and glass fiber material that is heat resistant up to 2600C.
That means it is the perfect surface for all of your fusing, ironing, and gluing needs.
Fusible Applique Place the applique design under the Appli-Fuse mat. Since the mat is transparent, the cut applique shapes can be placed perfectly.
Since it is heat resistant, multiple layers can be placed simultaneously and pressed with a hot iron. The layered appliques can then be picked up as one piece and placed on the background fabric. The mat is slightly tacky so the pieces won't migrate when positioned. It is the perfect working surface whenever using a glue gun. Any globs of glue will flake off easily and protect the table underneath.
Clean the mat with soap and water or place it in the dishwasher.
The 10in Log Cabin Trim Tool Duo features exclusive markings to create perfect finished Log Cabin; Half Log Cabin; or Courthouse Steps blocks up to 10in. But, in this case, there are two sets of markings - one set for 1in finished logs and additional markings for 1/2in finished logs. Make log cabin blocks with all the same width of strips, or combine the two widths for limitless design potential! After adding each round of logs, place the appropriate centering square on the ruler over the center square of the block and trim. Since each round is squared up before the next set of logs are added, the results are spectacular. The cutting instructions for the strip widths and center square are printed right on the tool!
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! The tool comes with fully illustrated step by step instructions or view a video demonstration.
Total Size - 10-1/2in x 10-1/2in
Creative Grids® products are made in the USA
This 10-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. This is the perfect size to sub-cut the 10 inch pre-cuts that are on the market. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches.
The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature — designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides — to add the 1/2 inch seam allowance. A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable.
Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a video demonstration of these features.
Total Size - 10-1/2in x 10-1/2in
Creative Grids® products are made in the USA
This 20-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance. A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a video demonstration of these features.
Total Size - 20-1/2in x 20-1/2in
Creative Grids® products are made in the USA
This 8-1/2 x 24-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30/60 degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features. This 8-1/2 inch width is also available in 12-1/2 inch (Item CGR812) and 24-1/2 inch (Item CGR824) lengths.
Total Size - 8-1/2in x 24-1/2in
Creative Grids® products are made in the USA
