The 1⁄4” RULER FOOT was specifically designed to use with quilting
rulers for ruler work.
The key point of the foot is the 1⁄4” cup height. The cup moves smoothly alongside the quilting ruler without allowing the ruler to
slide over or under the ruler work foot.
1⁄4” Ruler Work Foot (Low Shank)
This foot is compatible low shank models that are top loading and have up
to a maximum 7mm stitch width.
Compatible current models: 4300QDC, DM7200, Sewist 780DC, DC6050, Sewist 740DC, JP760, DC3200, DC2150, DC2030, DC1030, MS5027LE, MW3018LE, Sewist 725S, Sewist
721, Sewist 709, FD216 & FD206.
Part Number: 202 442 000
Janome Overlock Foot
7mm Max Stitch Width
Suitable for Janome machines witha 7mm max stitch width
Janome Ruffler Foot - 943100000
Compatible with: FD206, FD216, Sewist 709, 721 and 725S, Elna EL2000, DC1030, DC2030, DC2050, DC3200, Sewist 740DC, DC6050, MS5027
Janome Taping Guide Foot 9mm
Part No. 202310008
The Janome Taping Guide Foot for 9mm Janome machine Models is your solution to attaching tape and binding to your garments and quilts. Use the Janome Taping Guide Foot for 9mm Models with all Janome snap on 9mm models. The Janome Taping Guide Foot for 9mm Models works with tape from 5mm-20mm wide and can be used with both single fold bias tape and double fold bias tape. You can adjust the Janome Taping Guide Foot for 9mm Models to fit with width of your tape with just the turn of a screw.
Fits these Janome sewing machines: CM7
If your machine is not listed above, please ask us and we can help to find the right foot for you
Janome AcuFeed - Dual Feed Open Toe Foot - Twin
The Janome Acufeed Open Toe Foot Twin is one of the interchangeable feet for the AcuFeed Flex Twin holder.
There are certain techniques that often require better visibility of stitches such as quilting, applique, cut work and craft work.
The AcuFeed Open Toe Foot will solve all those problems allowing a much better view of the sewing in progress whilst guiding the fabric smoothly and evenly.
Fits these models: MC6700P, MC8200QCP, MC8900QCP, MC9400, MC9450, MC12000, MC14000, MC15000, Skyline S6, Skyline S7, Skyline S9 and the Continental M7 Professional.
Part no. 201 149 004
Janome Machine Pin Cushion - White with Red Dots
When you are sewing or quilting, you always need your pins nearby. But within minutes of setting your classic tomato pincushion on your sewing table, you can bet it'll be covered by fabric, knocked on the floor or just out of reach.
Janome has come up with a creative solution for this: a pincushion that mounts on the top of your machine. You can always find it, reach it and you'll never knock it on the floor.
This pincushion fits Janome models that accept an additional Spool Pin Holder, these are the following models it works with:
Horizon Memory Craft 12000, Memory Craft 9900, Skyline S3, Memory Craft 11000 Special Edition, MC 350E, MC 200E, Memory Craft 500E, Horizon Memory Craft 8900QCP Special Edition, Horizon Memory Craft 8200QCP Special Edition, Skyline S7, JNH7700, HD-3000, DC1050, Hello Kitty 18750, Magnolia 7330, Magnolia 7360, DC2013, DC5100, JNH2030DC, 3160QDC, 4120QDC, 8077, 49018, 49360, DC2012, DC2014, DC3050, DC4030P, JW7630, 8050, NQM 2016, Hello Kitty 11706, HD-1000, 2222, 2212, 2206, 3128, Hello Kitty 13512, Hello Kitty 14412, Hello Kitty 15312, 41012, 128, JW5622, JW7522, Skyline S5, JW8100, Horizon Memory Craft 9400QCP, Horizon Quilt Maker Memory Craft 15000, Skyline S9, AMH M100, MOD-200, M7200, M7050, 6100, 6050, M7100, SUV1122, Horizon Quilt Maker Memory Craft 15000, Memory Craft 6700P, Arctic Crystal, 4120QDC, 3160QDC, 2030QDC, HD-3000 Black Edition, 4300QDC, Horizon Memory Craft 9450QCP, DC2019, Skyline S6, Sewist 780DC, Sewist 740DC, Sewist 721, Sewist 725S, NPCF50, Memory Craft 6650, Memory Craft 550E, Continental M7 Professional, Memory Craft 9850
If your Janome machine is not included in the above list please contact us and we will let you know if this pin cushion will work with your machine.
Janome Buttonhole Foot - 753801004
Fits: 625E, 4618QC, 5018, 5024, 5124, MS2028, MS2522, MW3018LE, MS5027LE, MX3123, MS2132, SW2018, 652, 659, 6019QC, 6125QC, 6260QC, 2160DC, 3160QDC, 4120QDC, 19110, CS995, DC2050, DC2101LE, DC3018, DC3050, DC3100, DC4030, DC6030, MC3000, MC3500, MC4000, MC4800, MC4800QC, MC4900QC, MC6500P, MC6600P, MC7700QCP, S3, 725
Janome Open Toe Walking Foot - 7mm Low Shank - 200339007
The even feed foot, sometimes referred to as the walking foot, is designed with a set of feed dogs (teeth) which allow the fabric to feed without shifting and eliminates the problem of the under layer of fabric coming up short. The even feed foot is also great for topstitching which can be spoilt due to irregularity of stitching. This is often caused by the bulk created with the seam allowance especially around collars and reveres. Using the walking foot for topstitching will eliminate this problem and give perfect stitching every time. Also includes quilting guide.
The 7mm Walking Foot will fit Low Shank Machines with 7mm Stitch Width
Janome 1/4" Seam Foot - Clear View - 200449001
For Janome 7mm machines
3 Way convertible set for:
- 1/4" and scant 1/4" seams
- Ditch Quilting
- 1/8" Seams
Janome Border Guide Foot - 202084000 (9mm)
Fits these Janome machines: MC12000,MC9900,MC8900QCP, MC8200QC
Janome Gathering Foot - 5mm
It's suitable for use with these Janome sewing machines: DC1030, JR1012, RE1306, 721, 709, 725S
If your machine is not listed above, please ask us and we can help to find the right foot for you
200124007
